There are many people and materials in the factory building. In order to avoid causing greater losses, the fire protection measures of the steel structure factory should be done. Especially for steel structure workshops, because steel is a non-combustible material, but it conducts heat very quickly. Generally, it is the reason for the collapse of the factory building caused by fire in the steel structure factory building. Therefore, in the construction of the steel structure factory building, protective measures must be taken.
First of all, the fire-resistance rating of the building must be reasonably confirmed, the fire hazard category should be distinguished, and then a reasonable fire protection method for steel structures should be adopted. From the current point of view, there are three methods for protecting steel components, namely spraying, coating and water cooling Method, through scientific analysis and comparison, according to the degree of fire resistance of the member to select the appropriate steel structure fire protection method, in order to achieve a win-win situation of safety and economy, but also to take preventive isolation measures, reasonable planning of fire protection zones, And strictly control the area of the fire protection zone to slow down the spread of fire. In the design of the steel structure factory building, the evacuation passage opening of each zone needs to be controlled. When the fire occurs, people can be quickly evacuated to a safe zone to reduce property losses. Reduce casualties.
With the wide application of new technologies, new opportunities and challenges have been brought to the fire protection design. As a designer, all aspects should be considered comprehensively, and comprehensive consideration should be given to the correct response to the advanced fire protection. The technology must be reasonable and economical, but also applicable and convenient, while also ensuring the safety and fire protection of the steel structure industrial plant.