Last time we made a summary of some questions raised by visitors from our website. As there is a word limitation, we can’t list all the questions. These days we’ve received some more questions about steel structure, installation, and some other related doubts. So today we make another article to answer those questions that have been asked commonly.
A.How to paint a metal utility building wood grain?
The imitation wood grain paint could be used to make the steel structure in wood grain. Firstly, make the anti-rust treatment for steel structure. It is not too strict for the base layer of steel structures if you want to make wood grain paint. Secondly, paint the wood-grain primer on the surface of the steel structures. Thirdly, paint the wood grain finishing coat after the primer is completely dry, and use a special wood grain device to pull out the wood grain effect while painting. Finally, spray it with a dust-proof top coat, so that the imitation wood grain paint will be prettier and the lifetime will be longer.
Actually, you can choose a high-quality door, such as an electric rolling door, sliding door, or security door. Or you can also put the windows in a higher position so the thief can’t get in the warehouse from the window.
C.How to insulate a metal building?
Generally, there are three kinds of methods to insulate a metal building. The first one is to use glass cotton sandwich panel as wall panel and roof panel. The second one is to spray the heat reflection paint on the surface of the roof and wall panel, which will reflect the heat back so the temperature inside the metal building will be decreased. The third one is to add fans inside the metal building.
D.How to erect a metal building?
We’ve received a lot of same questions like How to erect a metal building? What should we prepare before the installation? Which equipment will be used on site? There is no doubt that the installation is very important to ensure the metal building safe and pretty. Following tools need to be prepared before the erection: crane, straight ac welder, theodolite, gradienter, sealant gun, steel wire rope and etc. A local professional installation team will be a great choice.
E.How to dismantle a metal building?
There are the following key points need to be noticed during the dismantlement of a metal building:
The demolition work should be performed from top to bottom, and the workers should cooperate with each other. It is forbidden to dismantle the components in high and low position at the same time, and it is forbidden to remove the partition board firstly.
The safety measures must be implemented in demolition construction site, and on-site construction personnel and some equipment must be managed properly.
Workers participating in the construction must undergo relevant training, and take necessary safety measures during construction, such as wearing safety helmets, wearing non-slip shoes. Electricians and electric welding workers must wear insulated shoes. High-altitude workers must wear seat belts.
Beforethe construction, the power supply inside the steel structure should be removed or cut off, and the machines, tools, and related equipment that need to be used should be checked to ensure that the safety devices are safe and effective.
Infrared and warning signs should be installed in the demolition area to prevent unrelated persons from entering the demolition site.
F.How do you install roof sheeting on a metal building?
The roof sheets are connected with roof purlins by bolts. The roof purlins should be installed firstly then fix the roof panel on purlins. Fix the fixed seats on the first row, one on each purlin, so that they can correctly engage with the inner ribs and center ribs of the steel plate. Then install the first steel plate on the fixed seat, and then put the second one on the steel plate which is placed on the second fixed seat. The steel roof plate is locked with a steel plate locking machine.
G.How to stop flood in a metal building?
It can be solved from two aspects, waterproofing and drainage. The waterproof coating could help to prevent the water getting inside the building. And the gutter will be helpful for drainage. One thing needs to be noticed that there shouldn’t leave any leakage on the roof during the installation.
That’s all what we want to share with you today, for more questions, you could leave a message or contact us by email: firstname.lastname@example.org, thank you.