The second-story steel structure platform of the warehouse is also called the working platform. It has various methods, flexible design schemes, and stable structure. The larger feature is a fully assembled structure. It can design schemes and produce manufacturing platforms according to different on-site conditions. Consider application The steel frame structure two-story platform specified by regulations and freight logistics regulations is commonly used in warehouse storage. Even if it is a two-story platform, it will have a certain aspect ratio. Therefore, in order to ensure safety, it is necessary for the envelope structure work to Do it well.
1. Snap ring should be used when steel structure platform, do not make the lifting hook immediately hook the platform hook.
2. The upper and lower sides of the steel structure platform must be equipped with fixed railings and handrails, and can also be hung with dense mesh safety nets.
3. When the steel structure platform is installed, the wire rope should be hung with special hooks. When using other methods, the locks should not be less than three. The steel wire rope should be lined with sponge cushion at the obtuse angle of the building. Should be slightly higher than the inside.
4. The level intersection angle between the steel wire rope and the platform should be 45 degrees to 60 degrees.
5. The compressive strength of the columns and beams of the upper tensile joints of the steel structure platform is checked to ensure the safety of the warehouse building and the platform.
6. The concrete beam guardrail plate at the place of the steel platform shall be embedded with embedded parts and connected with the screws of the platform.
7. The shelving point and upper pull joint of the steel platform must be located on the building, and cannot be set on steel pipe scaffolding and other engineering construction equipment, and the support point system software cannot be connected with the steel pipe scaffolding.
8. The steel platform should set the limit weight license.