You Have a Vision. We Can Help. Receive a Free Quote and Drawing Within 24 Hours.
The multi-storied structures building offer ample flexibility in design and aesthetics for commercial buildings. The lesser and smaller columns enable the construction of larger spaces and also enable a lighter foundation. They are commonly used in structures such as multi-level metal workshop 3 story commercial buildings, aircraft hangars, stadiums, metro stations as well as railway stations. The base material of the multi-story steel structure is good quality Q235/Q345 steel. Earthquake conditions is 8 Degree earthquake conditions,Climate conditions -20°C-45°C,Snow load100 Kg/m⊃2;,Wind speed150 Km/h.
Here's why multi-floor steel buildings are an affordable and convenient solution for your construction needs
The three generic forms of flooring systems that are most commonly used in multi-floor steel-framed office buildings are:
During the construction stage, and prior to composite action of the decking and concrete being fully achieved in the normal stage, the decking alone will need to support the load due to wet concrete and construction live loads. During construction, propping to the decking may allow longer spans to be achieved in the normal stage. Modern composite slabs contain re-entrant portions which facilitate the attachment of wires for suspended services and ceiling.
Steel decking is installed by craning onto the primary steelwork in bundles and usually man-handling into position.
Completed and decked floors may be used as a safe working platform for subsequent installation of steelwork. For this reason, the upper floor in any group of floors (usually three-floor levels) is often concreted first.
The deep decking is supported on end diaphragms which provide stability to the web of the decking and also prevent loss of concrete when it is poured on the decking.
Precast concrete slabs are proprietary products that are manufactured in standard depths and widths. They are pre-stressed to increase their spanning capabilities and stiffness. Precast slabs are widely used in smaller offices, but less so in large building projects.
Steel structure relative to the concrete structure, its shortage is bearing relatively poor, so the steel structure for wall materials requires more lightweight, obviously, the traditional block is very difficult to meet this requirement, lightweight partition board and steel structure building has become a perfect partner. There are three common types of panels used in multi-floor metal buildings. Each one has unique properties, depending on the kind of structure you're building or the kind of environment surrounding it. Here is a brief overview of each type of metal wall panel: single skin, metal composite material, and insulated.
Multi-storey building with metal wall panels single skin metal panels are also referred to as preformed or roll-formed panels. Most wall panels of this type can be installed horizontally or vertically in less time and with less of the cost of other metal panel systems. They can come insulated or uninsulated and can be made with protective coatings that help fight corrosion and fading. There are certain benefits to using single skin metal wall panels including:
This type of metal wall panel has been used in steel structure projects in North America for almost 40 years. These panels are formed by joining two thick metal skins to a core that is made of polyethylene or other fire-retardant plastic material and bonded under a specific temperature, pressure, and tension. The end product is a metal/plastic composite with greater benefits than just using a solid metal panel of the same thickness.
As the name suggests, this metal wall panel is made with an insulating foam center (typically expanded polystyrene or polyisocyanurate) sandwiched by two aluminum or steel metal face panels. They make an excellent choice for commercial or industrial buildings and climate-controlled facilities.
When deciding whether or not you should use IMPs for your job, environmental factors should be taken into consideration, as these metal panels need to be sealed properly to prevent water intrusion. Climate also plays a deciding factor, so take into consideration the humidity, temperature, and air movement of the location you plan to install these metal wall panels.
Insulated metal wall panels are great to use in some metal building applications because:
Looking for a reliable and affordable Multi-Floor Steel Structure Building? Get in touch with our sales team now!
0086-15621008853
Daniel